X-10235-X Q-SUN Xe-1/Xe-3 Black Panel Temperature Sensor (replace as necessary).It should be replaced once a year and cannot be recalibrated.Ĭommon Q-SUN thermometer part numbers are shown below: Calibrating the Xe-1 chamber air temperature sensor is simply performed with any standard reference thermometer.In both the Q-SUN Xe-2 and Xe-3 models, the low-cost, combination relative humidity/chamber air temperature sensor was thoughtfully designed to be disposable. In the Q-SUN Xe-1, the tester can have an optional chamber air temperature sensor (included for a model Xe-1 with chiller). National Institute of Standards and Technology (NIST). Our calibration labs are ISO 17025 accredited by the American Association of Laboratory Accreditation (A2LA - Ohio Certificate Number 2382-01, China Certificate Number 2383-02 and England Certificate Number 2383-03). UC202 units may also be returned for calibration for users who prefer recalibration to replacement. The CT202 thermometer needs to be returned to Q-Lab once per year for an inexpensive recalibration. The UC202 thermometers were designed to be disposable and cost-efficient, and should be replaced annually with a freshly-calibrated UC202. ![]() ![]() Note that CT202 and UC202 thermometers comes with either an uninsulated black panel or insulated black panel sensor, and must match the type of sensor actually used in the Q-SUN tester.Ĭalibration of the UC202 and CT202 thermometers needs to be performed annually. Calibrating the black panel temperature sensor is simple using the Universal Calibrator system’s UC202 calibrated temperature sensor and UC1 handheld display, or the historical CT202 thermometer, and takes only a few minutes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |